Vanner LSC12-2000 - Page 12

10
3-2-1-5 Charger current Select Function(S9,S10)：
：：
：Default : 100%
Charger Current (%) S9 S10
25% OFF OFF
50% ON OFF
75% OFF ON
100% ON ON
Table 9 ： Charger current select function definition
3-2-1-6 DC Source Output On/Off Function (S11)：
：：
：Default : ON
ESB function S11
OFF OFF
ON ON
Table 10 ： DC source output On/Off function definition
3-2-1-7 Saving Function Switch On/Off Function (S12)：
：：
：Default : OFF
The saving mode will be triggered if the output load <20W @10seconds.
Saving function S12
OFF OFF
ON ON
Table 11 ： Saving function switch On/Off function definition
3-2-2 Status LED indicator:
Icon Description Icon Description
Battery Input voltage indicator Output Load indicator
Alarm indicator Charger Stage indicator
Table 12 ： LED indicator
Status
LED
Indicator
Green
Off Inverter mode
Solid ON
Normal
(12V: 11.5 ~ 15.0V)
(24V: 23.0 ~ 30.0V)
Normal
(0~100%)
Normal status Float mode
Slow Blink
Over Temperature
Protection
Equalization mode
Fast Blink
Under Temperature
Protection
Active mode
Orange
Off Inverter mode
Battery Low voltage Over load (100%- Phase or Frequency Absorption mode