Vanner LSC12-2000 - Electrical Specification

4
2-2. Electrical specification
Electrical
Specification Model No.
Item LSC12-2000
Inverter
Mode
Input
Characteristics
Nominal Voltage 12 VDC
Input Voltage
Range (±0.5V)
10.5 ~ 16.5 VDC
Input Over-
Voltage
Protection (±0.5V)
16.5 VDC
Input Over-
Voltage
Warning (±0.5V)
15.5 VDC
Input Under-
Voltage Protection
(±0.5V)
10.5 VDC
Input Under-
Voltage
Warning (±0.5V)
11.0 VDC
Input Current (Max) 260 A
No Load Current < 4.0 A @12.5V
Stand-By Current < 0.4 A
Output
Characteristics
Continuous
Output Power
2000 VA ± 3%
Surge Power
Load 101%~115% (1 Min)
4000 VA (2 Sec)
Frequency 50/60 Hz ± 0.3 Hz (User-selectable)
Output Voltage 100 / 110 / 115 / 120VAC ±3%
Max. Efficiency
(Full Load)
89%
Output Waveform Pure Sine Wave (THD < 5% @ 12.5V/25V/115VAC, linear load)
INV. AC Output* 20A MAX
AC Output* 20A MAX
Protection
Input Protection Over / Under Voltage, Reverse Polarity (Internal Fuse)
AC Output
Protection
Short-Circuit, Overload
AC Input Protection 30 Amp Circuit Breaker
Temperature
protection
Shutdown
Charger
Mode
AC input
Characteristics
Nominal Voltage /
Frequency
110 VAC, 50 / 60Hz
(User-selectable)
Input Voltage
Range
90 ~ 132 VAC
Input Frequency
Range
50Hz:47 ~ 53 Hz / 60Hz:57 ~ 63 Hz
Nominal Current 16.5A (@110VAC)
Efficiency (Max.) >88%