Vantrue OnDash N4 - Page 15

On and Off.
G-Sensor Set: Press and or button to select the sensitivity
options: 1,2,3,4,5,OFF.
Audio Recording: Press button and button to toggle it OFF/ON.
Parking Mode: Press and button to change the options: Collision
Detection, Collision + Motion Detection, Motion Detection, Low Bitrates
Recording, OFF.
Collision Detection: Press the and or button to select the
section: Low, Medium and High.
Collision +Motion Detection: Press the button or button to
select the section : Low, Medium and High.
Motion Detection: Press the button or button to select the
section : Low, Medium and High.
Exposure: Press and or button to select between Front,
Cabin and Rear exposure.
Front: +2.0, +1.6, +1.3, +1.0, +0.6, +0.3, +0.0, -0.3, -0.6, -1.0, -1.3, -1.6, -2.0
Cabin: +2.0, +1.6, +1.3, +1.0, +0.6, +0.3, +0.0, -0.3, -0.6, -1.0, -1.3, -1.6, -2.0
Rear: +2.0, +1.6, +1.3, +1.0, +0.6, +0.3, +0.0, -0.3, -0.6, -1.0, -1.3, -1.6, -2.0
WDR: Press and button to toggle it OFF/ON.
Number Plate: Press or and button to set your car license
number.
Stamp: Press button to toggle it OFF/ON. Stamp shows the date/-
time, logo, car number, Speed and GPS Location information.
Rotate Display: Press and or button to select the options:
Front+Cabin, Rear.
Time Lapse: Press and or button to select the options: 1FPS,
5FPS and OFF.
Recording Light: Press and button to toggle it OFF/ON. The
indicator light will stop blinking on recording if turns off.
- 11 -
•
•
•
•
•
•
•
•
•
•