DS-521
If, after the adjustment
57
, the brake does not work properly, contact an authorised service center.
2.5.5 Service intervals
Activity Before cutting In season Before storage
Engine oil level check yes following the engine user manual yes
Cleaning the engine air filter check every 10 hours yes
Washing - 2x yes
Removal of dirt and cut stand remains - after each cutting yes
Blades sharpening - according to need yes
Check the blades and their placing yes immediate exchange if damaged yes
Cutting disk tightening check yes - yes
Bolted connections tightening check yes every 5 hours yes
Lubrications condition check Tab. 5 Tab. 5
V-belts check - every 20 hours yes
Tab. 6: Service intervals
57 The condition of the axial clearance of the brake cable in the adjusting screw is met.
22
To Next Page
Loading...
