7 / 10
4.2. Description of the Menu
Addr DMX address setting
1. Push the UP/DOWN buttons until the display shows Addr.
2. Push ENTER
3. 1 appears in the display blinking. With the UP/DOWN buttons you can no adjust the DMX
address from 1 to 512
4. Push ENTER to confirm
SLNd Master Slave Settings
1. Push the UP/DOWN buttons until the display shows SLNd.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from MASt, SL1 and SL2.
4. Push ENTER to confirm
Soun Sound To Light Mode
1. Push the UP/DOWN buttons until the display shows Soun.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from on or oFF.
4. Push ENTER to confirm
SenS Sensitivity adjust of the Mic
1. Push the UP/DOWN buttons until the display shows SenS.
2. Push ENTER
3. Use the UP/DOWN buttons to chosse from 1 to 100, 1 means the most insensitive range and
100 the most sensitive range.
4. Push ENTER to confirm
bLNd Blackout or Stand By Mode
1. Push the UP/DOWN buttons until the display shows bLNd.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from on and oFF
4. Push ENTER to confirm
Led LEDs On and OFF
1. Push the UP/DOWN buttons until the display shows Led.
2. Push ENTER
3. Use the UP/DOWN buttons to choose from on and oFF
4. Push ENTER to confirm
To Next Page
Loading...
