OPERATION 11
• Potential modifications of programmes
If the default time schedules for the P1, P2 and P3 programmes does not suit
your routines, you can change them.
1- If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection mode, press for
5 seconds. When the cursor moves above the setting time symbol ,
press shortly.
1
2- Press or . The cursor moves above prog.
3- With or , select P1.
P1 will flash. Press for 5 seconds to make changes.
5 sec.
2
1
4- The P1 start time (which by default is 06:00) will flash.
Using or , you can change this time, by increments of
30 minutes.
2
1
Save by pressing .
FR
NL
DE
IT
EN
PL
To Next Page
Loading...