12 OPERATION
5- The P1 end time (which by default is 22:00) will flash. Using or , you
can change this time, by increments of 30 minutes.
Save by pressing .
2
1
6- Press to exit the programming Mode and return to Auto Mode.
• Choices and allocation programmes
1- If you just set the time and day, the cursor moves automatically under
PROG. From Auto, Comfort, Eco or Frost protection mode, then press
for 5 seconds. When the cursor positionned under the set time symbol ,
press again.
Prior information: day of the week
2
The days of the week will scroll on display with the programmes that you set for
them.
2- Press or .
The programme set for day 1 (1= Monday, 2 = Tuesday, etc.) will flash.
Correspondence days /numbers
Monday 1
Tuesday 2
Wednesday 3
Thursday 4
Friday 5
Saturday 6
Sunday 7
To Next Page
Loading...
Need help?
General