Taking care of your machine
Press the twin tank
release button and lift the
twin tank by the handle
Wrap the power cord around the quick
cord release hooks and insert the plug
into the plug storage socket
Emptying the twin tank
Storing your steam mop
Twist water cap
anti-clockwise and lift
to remove
Empty any excess water over
the sink, replace water cap
and turn clockwise to tighten
IMPORTANT: Allow the steam mop to fully cool down before performing any maintenance or troubleshooting checks
Don’t leave water or detergent in the twin tank between uses, as this can eect the machines performance, the twin tank
needs to be emptied and rinsed after each use.
IMPORTANT: Don’t use bleach or fabric softener when washing the microbre cleaning pad.
Always allow the steam mop to fully cool down before removing the microbre cleaning pad.
Hold corner of pad down
with foot and lift steam mop
to peel away
The microbre pad is machine
washable (Max 40°C) allow to
fully dry before use
Cleaning the microbre cleaning pad
Max 40°C
IMPORTANT: Don’t operate the steam mop without hard water lter in place. The condition of the lter aects the
performance of your machine, check and change lter periodically. If you live in an area of hard water the lter will
discolour or darken over time. Depending on water hardness and frequency of use, the lter should be changed every
3 to 6 months or if the lter has discoloured.
To Next Page
Loading...
Need help?
General
