Vax S86-SF-CC - Using your Conversion Starter Kit with your steamer; Using the 360° connector with cleaning tools

Slide the rotation collar forward and rotate the 360⁰ connector to the most suited cleaning position.
1 2 3 4
Using the 360� connector with cleaning tools
To attach cleaning tools to the 360⁰ connector, line
up the edge of the tool with the 360⁰ connector and
in a hinge like manner rotate the tool until it clicks
securely in place.
To remove the tool from the 360⁰ connector,
push the release tab at the front of the tool.
Using your Conversion Starter Kit
with your steamer