Vax S86-SF-CC - Getting started; Before you Begin; Assembling your steamer

Getting started
Getting to know your machine
Push the main body down
into the oorhead until it
clicks into place.
Push the handle into main
body until it clicks into place.
Stand the steamer upright
by pushing the main body
forward to lock into position.
Assembling your steamer
Insert concentration nozzle
into the storage hook on the
back of handle.
Insert tools into the back
of the steamer.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you Begin
CAUTION
• The steamer and accessories get very hot during use, always allow them to cool down before handling.
• Always unplug and switch o the steamer when assembling.
• Always switch o the steamer before emptying the water tank or changing the cloths/accessories.
IMPORTANT
• Please refer to oor manufacturer’s care recommendations before use and test the steamer on a hidden area of ooring
to begin with.
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don’t aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet
or oorhead from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal cut-out. If for any reason the steamer overheats it will switch o.
If this happens turn o and unplug the steamer, allow to cool for at least 2 to 4 hours and re-try.