Taking care of your machine
WARNING: To reduce the risk of personal injury - Unplug vacuum before cleaning or servicing.
Do not use vacuum without dirt cup or lters in place.
IMPORTANT: The cyclone separator should not be submerged in water.
Cyclone separator
Hold the dirt cup and turn the
separator counter-clockwise.
Dirt and debris can be cleaned
from the lter assembly
with dusting brush or a towel
or rag.
Replace the lter assembly
on the dirt cup, and twist
it clockwise to secure into
position.
Replace dirt cup.
How to Clean
Remove dirt cup as described
in “Dirt cup - How to Empty”
To remove inner shroud, hold
the dirt cup and rotate the
shroud clockwise.
To Next Page
Loading...
Need help?
General
