Taking care of your machine
Taking care of your machine
WARNING: To reduce the risk of personal injury - Unplug vacuum before servicing.
Do not use vacuum without dirt cup or lters in place. Allow lter to dry completely before replacing.
IMPORTANT: Rinsable can be rinsed in warm water (max 40°C). Allow to air dry for 24 hours before replacing.
Do NOT use any detergents or boiling water to wash lter.
Filters
Rinsable Filter
When to Clean
It is recommended that the Rinsable lter be checked and cleaned at least every 2 months or more frequently with
heavy use.
Grasp tab on lter and remove
from dirt cup.
Gently tap the lter on the
inside of a trash receptacle to
remove dust and dirt.
How to Clean
Remove dirt cup as described
in “Dirt cup - How to Empty”
Twist dirt cup lid
counterclockwise and remove
Rinsable lter.
Hold Rinsable lter under
running water to clean.
Allow to air dry for 24 hours
before replacing.
Replace lter in dirt cup
and twist lid clockwise
until secure.
Replace dirt cup.
To Next Page
Loading...
Need help?
General
