7. Enter the distances measured between the IMU and antenna A, more information on this can be found here.
8. If you would like to translate the data from the IMU location to another point on the vehicle where all
measurements will be made, enter the x,y,z offset values from the required translation point to the IMU, more
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_3i_Range/VBOX_3i_User_Guide_(All_Variants)/12-1_-
_VB3i_IMU_Integration_-_In-Vehicle_Mounted
55
To Next Page
Loading...