What to do if the picture or sound on my VDigi 24E100SQB is noisy when viewing a channel?
If you experience picture or sound noise when viewing a TV channel on your VDigi TV, check the antenna/cable connection.
Why is the picture from equipment connected to different input ports not displayed in colour on my VDigi TV?
If the picture from equipment connected to different input ports is not displayed in color, or is displayed in irregular colors on your VDigi TV, check the connection of the input ports to ensure they are firmly seated.
Why are some channels blank on my VDigi 24E100SQB TV?
If some channels are blank on your VDigi TV, it could be due to the following reasons: * The channel is exclusively for scrambled/subscription services, so you may need to subscribe to a pay TV service. * The channel is used only for data transmission and does not provide picture or sound. * You may need to contact the broadcaster for specific transmission details.
Why is HDMI equipment not recognized by my VDigi TV?
If your VDigi TV doesn't recognize HDMI equipment, verify that the equipment is compatible with control for HDMI.
Why are not all channels tuned for cable on my VDigi TV?
If not all channels are tuned for cable on your VDigi TV, contact the related cable broadcaster.
Are tiny black or bright points on VDigi TV screen a malfunction?
The screen is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.
Instructions for safe installation and use of the TV set to prevent hazards.
Guidelines for safely moving the TV set, including handling and packing.
Handling AC adapters and outlets safely to avoid fire and electric shock risks.
Locations, environments, and situations where TV use is prohibited to prevent malfunction or hazards.
Precautions to take if the TV screen is cracked to prevent injury or electric shock.
Detailed description of each button and its function on the remote control.
Detailed explanation of all ports located on the rear panel of the TV.
How to turn the TV on, turn it off, and put it into standby mode.
How to switch between different input sources like TV, HDMI, VGA.
Process for automatically scanning and saving TV channels.
Restoring the TV settings to their original factory defaults.
Viewing TV program schedules for the next 7 days.
How to set recording tasks using the Electronic Programme Guide.
Steps to format a USB device for DVR system setup.
How to access and play recorded files from the DVR list.
Solutions for common picture problems like no image, ghosting, snow, or distortion.
Solutions for sound problems, such as no sound when the picture is good.
Troubleshooting steps for selecting channels, blank channels, or digital channels.
General| Display Type | LED |
|---|---|
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 1 |
| USB Ports | 1 |
| VGA Port | 1 |
| Built-in Speakers | Yes |
| Display Size | 24 inches |
| Resolution | 1366 x 768 (HD) |
| HD | HD |
To Next Page
