VDO Cyclecomputing C3 - Optional Features and Mounting; Optional VDO Parts; Mounting Sensor and Magnet

52
GB
C1
C2
C3
C4
C1
C2
C3
C4
WS1/2 - 2 wheel sizes programmable for bike 1 + bike 2
7 languages selectable, full text display
Service-Interval-Indicator (wrench symbol)
Additional Function C2, C3, C4: Timing Indicator
Additional Function C4: Audible signal (beeper) for timing-functions
1.3 Optional features
The following genuine VDO parts are available at your Bike Shop
- set sensor/cable/stem mount (support rotated by 90°)
- set sensor/cable/handlebar mount
- set sensor/handlebar mount/cable 1.5 m for rear wheel mounting
2.1 Mounting cable sensor and magnet
Important: mount the sensor first, then mount the wired handlebar holder as described under
2.2. Check the following while mounting:
a. Distance between the sensor and magnet: 1 to 5 mm
>>> P02