VDO Cyclecomputing C3 - Timing Functions; Overview of Timing Functions

76
GB
C4
9. Timing functions
Your VDO-Computer features 5 individual timing functions. With any of the functions
selected the TIMING indicator << >> is activated in the upper left part of the display.
Set-/measuring range for all timing functions:
0:00:00 h to 24:00:00 h
TIMER 1: You can program a time window, i.e. for interval training. TIMER 1 counts on
from zero. A single beep indicates the end of TIMER 1.
TIMER 2: You can program another time window, i.e. for a break in your interval training
TIMER 2 counts on from zero. A double beep indicates the end of TIMER 2.
TIMER 1+2: With this TIMING-function selected, TIMER 1 and TIMER 2 time windows
are continuously cycled one after the other. A single beep indicates the end of TIMER
1, a double beep indicates the end of TIMER 2. TIMER 1+2 is activated, until you stop
TIMER 1+2 by pressing the M-key