Display of apparent wind velocity (Speed A)
This function displays the apparent wind velocity. The value is obtained
from the main display LOGIC WIND.
Example:
In this example the apparent wind velocity is 13.7 knots. The display
unit is determined by the setting on the LOGIC WIND.
Display of speed component against/with the wind (VMG)
This function displays the speed component against or with the wind.
The value is obtained from the main display LOGIC WIND. The coloured
dial fields mark the optimum wind angle, at which the best VMG (Velocity
Made Good) value can be expected.
Example:
In this example the VMG is 3.7 kn. The display unit is determined by the
setting on the LOGIC WIND. To display this unit a VDO LOGIC LOG must
be installed in the system, "Missing" is displayed if this is not the case.
44
MAIN FUNCTIONS
To Next Page
Loading...