VDO M1 WR - Setting 12-Hour AM;PM Clock

15
M1 WR
Press the BIKE button to set the hours.
The display information changes from “pm” to “am”.
Settings – clock
Press the SET button to confirm the hour/AM-PM setting.
The minutes now flash on the display.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M1 WR returns to function mode.
Setting the time in 12-hour AM/PM format
Press the SET button to confirm the selection “12”.
The hours now flash and “am“ or “pm” appears on the
display.