1x
SET
BIKE
Operation while cycling
While cycling, the display functions can be accessed by
pressing the BIKE button.
Pressing the BIKE button shows the next function on the
display.
Only ONE function at a time is shown on the display.
To once again display the speed, the SET button must be
pressed.
The SETTINGS can also be used to enable the automatic
return to the speed indicator from all function displays.
See page 16: Settings – speed indicator settings
Sleep mode
If you take a break and the M1 is in the bracket,
the computer switches to sleep mode after five minutes.
If you set off again after a break, the VDO M1 has an
auto-start function.
The VDO M1 instantly switches back to the function mode and
the current speed are once again displayed.
To Next Page
Loading...
