Preface
Congratulations
With your selection of a VDO computer you have opted for a technically very high quality appliance.
In order to fully benefit from the potential of the computer, we recommend that you carefully read this
manual. It contains all operating instructions and many other useful tips.
We hope you enjoy cycling with your VDO bike computer.
Cycle Parts GmbH
Pack contents
Please first check that this pack is complete:
Table of contents
1 VDO computer
Battery installed
1 universal handlebar holder
1 speed transmitter
Battery installed
1 rubber pad
for transmitter
1 spoke magnet
(clip magnet)
cable ties
for fitting the holder
and transmitter
1. Display 4
2. Operation 6
3. Functions 7
3.1 Information functions
in function mode 7
3.2 Cadence option 8
4. Installation 8
4.1 Fitting the transmitter, magnet
and handlebar holder 8
4.2 Switching on the computer
for the first time 9
4.3 Installing the battery in the computer 9
4.4 Placing the computer into
the handlebar holder 10
4.5 Transmitter pairing 10
5. Basic settings 11
5.1 Setting the language 11
5.2 Setting and measuring the wheel size 11
5.2.1 Select from tyre table 11
5.2.2 Setting using wheel circumference 13
5.3 Setting the clock 14
5.4 Setting the total kilometres 15
5.5 Switch from bike 1 to bike 2 15
5.6 Service interval display
16
5.7 Sleep mode 17
5.8 Reset functions 18
6. Terms of guarantee 19
7. Troubleshooting 20
8. Technical spezifications 21
„>>> P02“ links at the beginning of a chapter
are related to the respective picture in the
picture book!
To Next Page
Loading...
