DGBD GB
Preface
Congratulations
With your selection of a VDO computer you have opted for a technically very high quality appliance.
In order to fully benefit from the potential of the computer, we recommend that you carefully read this
manual. It contains all operating instructions and many other useful tips.
We hope you enjoy cycling with your VDO bike computer.
Cycle Parts GmbH
Pack contents
Please first check that this pack is complete:
Table of contents
1 VDO computer
Battery installed
1 rubber pad
for sensor
1 spoke magnet
(clip magnet)
cable ties
for fitting the holder
and sensor
1. Display 24
2. Operation 26
3. Information functions in function mode 27
4. Installation 28
4.1 Fitting the sensor, magnet
and handlebar holder 28
4.2 Installing the battery in the computer 29
4.3 Placing the computer into
the handlebar holder 29
5. Basic settings 30
5.1 Setting the language 30
5.2 Setting and measuring the wheel size 30
5.2.1 Select from tyre table 31
5.2.2 Setting using wheel circumference 32
5.3 Setting the CLOCK 34
5.4 Setting the total kilometres 34
5.5 Switch from Bike1 to Bike2 35
5.6 Service interval display
36
5.7 The navigator 37
5.8 Sleep mode 38
5.9 Reset functions 38
6. Terms of guarantee 39
7. Troubleshooting 40
8. Technical spezifications 41
„>>> P02“ links at the beginning of a chapter
are related to the respective picture in the
picture book!
1 universal handlebar holder
with cable and sensor
To Next Page
Loading...
