Veco CLIMMA COMPACT MK3 - VEGA MKII Infrared Remote Control

8
ENGLISH
5 - OPERATING INSTRUCTIONS
Il telecomando funziona con
due batterie AAA 1,5 V.
2.2 INFRARED REMOTE CONTROL FOR VEGA MKII
Buttons functions:
Button n.1:
It increases the Temperature Set Point value.
Button n.2:
It changes the luminosity of the warning lights and of the
display on a four level scale.
Button n.3:
It decreases theTemperature Set Point value.
Button n.4:
Fan speed control. Four manual speeds (1 - 2 - 3 - 4) or
automatic speeds.
Button n.5:
Special modes:Unattended, Dehumidify or Fan Only.
Button n.6:
ON/OFF button.
When the panel is ON, the display shows the ambient
temperature (or the abbreviations U, d, FO if the
Unattended, Dehumidify or Fan Only Modes are set up) +
mode and fan warning lights.
When the panel is OFF, the display shows only the ambient
temperature and all the warning lights are switched off.
Button n.7:
Automatic speed selection (A).
4 - OPERATING INSTRUCTIONS
COOL: SUMMER functioning switch
HEAT: WINTER functioning switch
FAN: Fan speed switch
TEMP: Thermostat switch