EasyManua.ls Logo

Veeco MS40 - Page 147

Veeco MS40
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vacuum Instrument Corp.
2099 Ninth Avenue
Ronkonkoma, NY 11779
631.737.0900
‘Y’ - Followed by 3 to 4 characters.
Fine Crossover Delay (D1) in Tenths of seconds.
(e.g. 0.1 = 0.1 seconds)
(e.g. 14.2 = 14.2 seconds)
In software revisions 3.8 and later, this field is fixed at 5
characters.
(‘Y’ + 4 numbers).
(e.g. 0010 = 1.0 seconds)
‘Z’ - Followed by 3 to 4 characters.
Direct Rough Close Delay (D2) in Tenths of seconds.
(e.g. 7.2 = 7.2 seconds)
(e.g. 21.7 = 21.7 seconds)
In software revisions 3.8 and later, this field is fixed at 5
characters.
(‘Z’ + 4 numbers).
(e.g. 0010 = 1.0 seconds)
‘[‘ - Followed by 3 to 4 characters.
Vent Valve Open Delay (D3) in Tenths of seconds.
(e.g. 1.0 = 1.0 seconds)
(e.g. 15.2 = 15.2 seconds)
In software revisions 3.8 and later, this field is fixed at 5
characters.
(‘[‘ + 4 numbers).
(e.g. 0010 = 1.0 seconds)
‘\ ’ - Followed by 3 to 4 characters.
Vent Valve Close Delay (D4) in Tenths of seconds.
(e.g. 2.0 = 2.0 seconds)
(e.g. 10.3 = 10.3 seconds)
In software revisions 3.8 and later, this field is fixed at 5
characters.
(‘\ ’ + 4 numbers).
(e.g. 0010 = 1.0 seconds)
1109-186-00 Rev. C d-ix