Veeder-Root TLS-3 Series - Mag Sump Sensor Alarms; Pump Relay Monitor Alarm

Page 22
Mag Sensor Alarms
MMM DD, YYYY HH:MM XM
s1: FUEL ALARM
(Flashing Red light)
MMM DD, YYYY HH:MM XM
s1: WATER ALARM
(Flashing Red light)
ALARM
TEST
ALARM
TEST
CAUSE:
Monitored parameter exceeded preset
threshold.
ACTION:
Call for service following the procedures
established for your site.
CAUS E:
Monitored parameter exceeded preset
threshold.
ACTION:
Call for service following the procedures
established for your site.
MMM DD, YYYY HH:MM XM
s1: COMMUNICATION ALARM
(Flashing Red light)
ALARM
TEST
CAUSE:
Hardware failure - sensor or inter-
connecting wiring to console.
ACTION:
Call for service following the proce-
dures established for your site.
Pump Relay Monitor Alarm
MMM DD, YYYY HH:MM XM
r1: PUMP RELAY ALARM
(Flashing Red light)
ALARM
TEST
CAUS E:
Pump continues to run after it was
instructed to stop, or pump continu-
ously running longer than preset time.
ACTION:
Call for service following the proce-
dures established for your site.