Page 28
To Stop In-Tank Leak Testing
Press Function until the display reads:
TO STOP SINGLE TANK TESTING
Press Step, Change, Enter and Step. The display reads:
For individual tanks, press Tank to select the desired tank.
Press Enter to halt the test. The system confirms the ending of the
test by displaying:
STOP IN-TANK LEAK TEST
PRESS <STEP> TO CONTINUE
STOP LEAK TEST: TANK X
PRESS <ENTER>
LEAK TEST NOT ACTIVE
PRESS <FUNCTION> TO CONT.
TO STOP TESTING ALL TANKS
Press Step twice. The display reads:
Press Enter to halt the test. The system confirms the ending
of the test by displaying:
STOP LEAK TEST: ALL TANKS
PRESS <ENTER>
LEAK TEST NOT ACTIVE
PRESS <FUNCTION> TO CONT.
To Next Page
Loading...
