Page 37
Feed the paper tail (9) over the
paper guide (4) and down
behind the paper feed roller (5).
If using the Take-up Spool (2)
place the paper tail (9) between
the two halves and press them
firmly together until you hear a
click.
Push the Take-up Spool (2) into
the upper slots. Rotate the spool
counterclockwise until you
remove all slack in the paper. (If
the Take-up Spool is not going to
be used, thread the paper tail
through the slot (10) in the printer
cover.)
Push the paper release lever (6)
up and close the cover.
To Next Page
Loading...
