EasyManua.ls Logo

Veeder-Root TLS-300 - Page 15

Veeder-Root TLS-300
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page
12
MMM DD, YYYY HH:MM XM
T1 : SUDDEN LOSS ALARM
---- IN-TANK ALARM ----
T 1:REGULAR UNLEADED
SUDDEN LOSS ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\20.eps
MMM DD, YYYY HH:MM XM
T1 : HIGH PRODUCT ALARM
---- IN-TANK ALARM ----
T 1:REGULAR UNLEADED
HIGH PRODUCT ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\21.eps
MMM DD, YYYY HH:MM XM
T1 : MAX PRODUCT ALARM
---- IN-TANK ALARM ----
T 1:REGULAR UNLEADED
MAX PRODUCT ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\22.eps
MMM DD, YYYY HH:MM XM
T1 : PROBE OUT ALARM
---- IN-TANK ALARM ----
T 1:REGULAR UNLEADED
PROBE OUT ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\us\23.eps
CAUSE:
Fuel loss in the tank shown has exceeded a
pre-set limit during a Leak Test. This indicates
a possible leak, fuel being dispensed or other
unauthorized loss.
ACTION:
Silence the alarm by pressing the red ALARM/
TEST key.
Check that fuel has not been dispensed from
the tank during the test period.
Contact your VR Service Contractor for advice.
CAUSE:
Fuel level in the tank shown has exceeded the
High Product Alarm limit.
ACTION:
Stop the delivery immediately!
Silence the alarm by pressing the red ALARM/
TEST key.
CAUSE:
Fuel level in the tank shown has exceeded
the Safe Working Capacity.
ACTION:
Stop the delivery immediately!
Silence the alarm by pressing the red
ALARM/TEST key.
CAUSE:
There is a fault with the sensing probe in the
tank shown.
ACTION:
Silence the alarm by pressing the red
ALARM/TEST key.
Contact your VR Service Contractor for
advice.

Other manuals for Veeder-Root TLS-300

Related product manuals