Veeder-Root TLS-300 - Vapor Sensor Alarms

Page 15
Vapor Sensor Alarms
MMM DD, YYYY HH:MM XM
V1 : FUEL ALARM
----VAPOR ALARM----
V 1: EXIT RAMP WELL
FUEL ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\32.eps
MMM DD, YYYY HH:MM XM
V1 : SENSOR OUT ALARM
---- VAPOR ALARM ----
V 1:EXIT RAMP WELL
SENSOR OUT ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\33.eps
MMM DD, YYYY HH:MM XM
V1 : SHORT ALARM
---- VAPOR ALARM ----
V 1:EXIT RAMP WELL
SHORT ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\35.eps
MMM DD, YYYY HH:MM XM
V1 : WATER ALARM
---- VAPOR ALARM ----
V 1:EXIT RAMP WELL
WATER ALARM
MMM DD, YYYY HH:MM XM
consoles\qh\US\34.eps
CAUSE:
The vapor sensor at the location shown has
detected fuel vapor in the monitoring well.
ACTION:
Silence the alarm by pressing the red ALARM/
TEST key. Investigate the cause of the alarm and
take appropriate action.
CAUSE:
The vapor sensor at the location shown has been
disconnected or is inoperative.
ACTION:
Silence the alarm by pressing the red ALARM/
TEST key. Contact your VR Service Contractor
for advice.
CAUSE:
The vapor sensor at the location shown is
immersed in water and will not work.
ACTION:
Silence the alarm by pressing the red
ALARM/TEST key. Contact your VR Service
Contractor for advice.
CAUSE:
The vapor sensor at the location shown is
faulty.
ACTION:
Silence the alarm by pressing the red
ALARM/TEST key. Contact your VR Service
Contractor for advice.