Need help?Do you have a question about the Vega VEGADIS 61 and is the answer not in the manual?
General| Brand | Vega |
|---|---|
| Model | VEGADIS 61 |
| Category | Measuring Instruments |
| Language | English |
Provides information on supplementary documents like manuals and safety instructions.
Indicates the date of the document's last revision.
Explains the purpose of the operating instructions manual.
Identifies the intended audience for the manual.
Explains various symbols and their meanings within the manual.
Specifies requirements for personnel performing operations.
Defines the intended use of the VEGADIS 61 and adherence to specifications.
Alerts to potential hazards and damage from incorrect instrument use.
Outlines general safety regulations and guidelines for operation.
Emphasizes observance of safety markings and tips on the device.
States compliance with EC directives and confirmation of successful testing.
Lists relevant NAMUR recommendations the device fulfills.
Refers to specific safety information for installation and operation in hazardous areas.
Highlights environmental protection duties and management system certifications.
Details the components of the VEGADIS 61 and scope of delivery.
Explains the information provided on the instrument's type label for identification.
Describes the function of the VEGADIS 61 as an indicating and adjustment unit.
Illustrates connection scenarios for the VEGADIS 61 with sensors.
Details the four-wire cable connection to the sensor.
Provides instructions for handling, transporting, and storing the instrument.
Offers general guidance for installing the VEGADIS 61, including orientation.
Provides specific steps and dimensions for wall mounting the unit.
Explains the procedure for mounting the VEGADIS 61 on a carrier rail.
Details how to mount the VEGADIS 61 on tubes using a measuring instrument holder.
Lists crucial safety precautions for making connections, such as absence of voltage.
Guides on preparing cables and ensuring proper sealing for sensor connection.
Step-by-step guide for electrically connecting the sensor to the unit.
Illustrates the wiring connections for different sensor types and compartments.
Details the connection using a standard four-wire cable and terminal mapping.
Specifies connection using a specific ready-made cable and wire color mapping.
Shows the wiring diagram for PA/FF sensors.
Details connection with a 5-pin socket M12 x 1 cable and wire color mapping.
Explains the function and configuration of the module for display and adjustment.
Guides on installing and removing the module without interrupting power.
Describes the elements and interface for adjusting the instrument via keys and display.
Details the functions of each key ([OK], [->], [+] , [ESC]) on the adjustment module.
Refers to sensor-specific manuals for detailed setup and adjustment procedures.
States that no special maintenance is required with proper use.
Discusses operator responsibility for fault rectification and service contact.
Outlines the procedure for instrument repair, including return form and shipping.
Warns of process conditions and refers to mounting instructions for reverse steps.
Provides guidance on recycling and proper disposal of the instrument according to directives.
Lists general, ambient, and electromechanical specifications of the VEGADIS 61.
Details data transmission, configuration connection cable, and maximum cable lengths.
Covers protection ratings for housing types and overvoltage categories.
Mentions that approval documents contain specific technical data depending on the version.
Provides dimensional drawings for different VEGADIS 61 housing versions.
Illustrates different mounting accessories like plates, clips, and straps.
States that VEGA product lines are protected by industrial property rights globally.
Clarifies ownership of brands and company names used in the manual.
To Next Page
