Need help?Do you have a question about the Vega VEGAFLEX FX-E.80H and is the answer not in the manual?
General| Accuracy | ±2 mm |
|---|---|
| Housing Material | Aluminum or stainless steel |
| Communication | HART |
| Type | Guided wave radar |
| Application | Level measurement |
| Measuring Range | Up to 75 m (246 ft) |
| Process Fitting | Thread, flange |
| Process Temperature | -40 to 200 °C |
| Process Pressure | -1 to 40 bar |
| Output | 4 … 20 mA/HART |
| Protection Rating | IP66/IP67 |
| Material | 316L |
| Approvals | ATEX, IECEx, FM, CSA |
Explains the purpose and scope of the operating instructions manual for mounting, connection, setup, maintenance, and safety.
Identifies the intended audience for the manual as trained specialist personnel.
Explains various symbols and their meanings, including information, caution, warning, danger, Ex, SIL, list, action, sequence, and battery disposal.
Specifies that all operations must be carried out by trained specialist personnel authorized by the plant operator.
Defines that the components described are replacement parts for existing sensors.
Highlights the importance of noting associated approval documents for the instrument.
Outlines the company's environmental management system and user obligations for environmental protection.
Lists the applicable hardware and software versions and the scope of delivery for the electronics module.
Explains the electronics module's suitability for exchange in sensors of the VEGAFLEX 80 series.
Details packaging materials, transport considerations, inspection upon receipt, and storage conditions.
Specifies required storage and transport conditions including temperature and relative humidity.
Provides guidelines for safely lifting and carrying instruments weighing more than 18 kg.
Provides general advice and essential safety warnings for mounting the electronics module.
Details checks and lists for selecting the correct electronics module for the respective sensor.
Step-by-step guide for installing the electronics module, including figures and numbered actions.
Details necessary sensor and parameter data, ordering replacement modules, and serial number verification.
Explains methods for transferring sensor data using PACTware software or via download from the homepage.
Details the crucial steps for verifying data transfer and ensuring correct operation for SIL qualified instruments.
Explains how to enter application-specific settings and transfer saved data after electronics exchange.
Provides instructions for returning instruments for repair, including forms, cleaning, packaging, and contacting the agency.
Warns about dangerous process conditions and instructs to reverse the mounting steps.
Gives information on recycling, environmental disposal, and the WEEE directive for the instrument.
States that the technical data are listed in the operating instructions manual of the respective sensor.
Informs about the global protection of VEGA product lines by industrial property rights.
Clarifies that all brands and company names used are property of their lawful proprietor or originator.
To Next Page
