Need help?Do you have a question about the Vega VEGACAL 63 and is the answer not in the manual?
General| Communication | HART |
|---|---|
| Application | Level measurement |
| Power supply | 24 V DC |
| Protection | IP66, IP67 |
| Operating temperature | -40 ... +80 °C |
| Storage temperature | -40 ... 80 °C |
| Measurement range | Up to 6 m |
| Accuracy | ±2 mm |
| Output signal | 4...20 mA, HART |
| Process pressure | -1 ... 10 bar |
| Housing material | stainless steel |
General safety guidelines for instrument operation and installation.
Specific safety precautions for hazardous area applications.
Explains the working principle of the VEGACAL 63 sensor.
Lists optional accessories for the device.
General guidelines and considerations for instrument mounting.
Step-by-step instructions for physical installation of the sensor.
Detailed steps for wiring the instrument to the power supply.
Electrical wiring diagram for single chamber housing versions.
Explains the operation of the display and adjustment module keys.
Guides through the initial setup and parameterization process.
Detailed parameter adjustment using PACTware software.
Procedures for identifying and resolving common instrument faults.
Steps for replacing a defective electronics module.
Comprehensive technical specifications and operating parameters of the device.
To Next Page
