EasyManuals Logo

Vega VEGAPULS 62 Specification Sheet

Vega VEGAPULS 62
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VEGAPULS 62 - 34496-EN-140131VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com
Specication sheet
VEGAPULS 62
4 … 20 mA/HART - two-wire
Radar sensor for continuous level measurement of liquids
Application area
The VEGAPULS 62 sensor can be used universally for continuous
level measurement in liquids.
It is suitable for level measurement in storage containers, reactors
and process vessels, even under dicult process conditions. With its
various antenna versions and materials, VEGAPULS 62 is the optimal
solution for almost all applications and processes. Its wide tempera-
ture and pressure range makes project planning simple.
Your benet
Maintenance-free operation thanks to non-contact measuring
principle
High plant availability, because wear and maintenance free
Exact measuring results independent of pressure, temperature, gas
and steam
Function
Extremely short microwave pulses are emitted by the antenna system
in the direction of the measured product, reected by the product
surface and received back again by the antenna system. The time from
emission to reception of the signals is proportional to the level in the
vessel.
A special time stretching procedure allows reliable and precise meas-
urement of the extremely short signal running times.
Technical data
Measuring range up to 35 m (114.8 ft)
Deviation ±2 mm
Process tting Thread from G1½; 1½ NPT; anges from
DN 40, 1½"
Process pressure -1 … +160 bar/-100 … +16000 kPa
(-14.5 … +2320 psig)
Process temperature -196 … +450 °C (-321 … +842 °F)
Ambient, storage and
transport temperature
-40 … +80 °C (-40 … +176 °F)
Operating voltage 9.6 … 36 V DC
SIL qualication Optionally up to SIL2
Materials
The wetted parts of the instrument are made of 316L, Hastelloy C22,
Monell Alloy, stainless steel precision casting 1.4848 or PTFE, PP,
PEEK. The process seal is made of FKM, FFKM or graphite.
You will nd a complete overview of the available materials and seals
in the "Congurator" at www.vega.com and "VEGA Tools".
Housing versions
The housings are available as single chamber or double chamber ver-
sion in plastic, stainless steel or aluminium.
They are available with protection ratings up to IP 68 (1 bar).
Electronics versions
The instruments are available in dierent electronics versions.
Apart from 4 … 20 mA/HART in two and four-wire version, there
are also digital versions with Probus PA, Foundation Fieldbus and
Modbus protocols. Another HART version is available with integrated
accumulator.
Supplementary electronics
For instruments with double chamber housing two supplementary
electronics such as radio module or a power pack are available.
Approvals
The instruments are suitable for use in hazardous areas and are ap-
proved e.g. according to ATEX and IEC. The instruments also have
various ship approvals such as e.g. GL, LRS or ABS.
You can nd detailed information at www.vega.com/downloads and
"Approvals".

Other manuals for Vega VEGAPULS 62

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vega VEGAPULS 62 and is the answer not in the manual?

Vega VEGAPULS 62 Specifications

General IconGeneral
BrandVega
ModelVEGAPULS 62
CategoryAccessories
LanguageEnglish

Related product manuals