IG-032-EN version 05; 18/06/2019
7
General instructions
pfu basic range: Prefabricated concrete
enclosure, ground-level walk-in type
Normal service conditions
4. Normal service conditions
The pfu is designed for use in normal service conditions in
accordance with Standard IEC 62271-1.
In the building, it is understood that normal indoor service
conditions according to Standard IEC 62271-1 prevail.
Installation Outdoor
Solar radiation 1000 W/m
2
Pollution due to corrosive and/or ammable
gases
Level II (medium)
Vibrations due to seismic movements or caused
by external causes
Negligible
Wind speed < 34 m/s
Table 4.1. Normal service conditions
To Next Page
Loading...