18
HPS10 PersonalScope
TM
Screen
Survey of the indications on the screen :
1. Dot indicates the vertical position of the
signal on the screen.
2. Trigger opening indication (fixed in the
middle of the screen)
3. Signal window with (possibly) the markers ,
cross or grid to indicate the various
divisions.
4. Time per division
5. Measurement readout or time between
markers,
6. Measurement readout or calculated
frequency 1/dt between markers (if present).
7. Measurement readout or voltage between the
markers (if present).
8. Measurement readout
9. Trigger information or screen hold
indication, input-coupling indication and
X10 probe setup.
10.Selected voltage per division.
11.Indication of the selected cursor key
function or battery-low indication.
Fig 9.0
1
2
3
4
5
6
7
8
9
10
11
HPS10_man.pub
page 18
Wednesday, April 03, 2002 09:22
Composite
To Next Page
Loading...
