__________________________________________________________________________________________________________________________________________________________
3
TECHNICAL DATA*
• Output power: 65 Wrms class A / 85Wrms maximum
• Output impedance 4 or 8 Ohm
• Ultra linear output transformer
• Switch-on delay, to protect the output tubes: approx. 1 minute
• Standby circuit
• Built-in bias current indicator
• Switch-on delay for the supply transformer : 0.5s
• Power bandwidth: 8Hz - 45kHz (-3dB, ref. 50W)
• Frequency range: 4Hz - 90kHz (-3dB, ref. 1W)
• Harmonic distortion:
0.1% (1 kHz/1W)
0.7% (1 kHz/65W)
• Signal/noise ratio: > 110dB (A weighted wrt 85W)
• Input impedance: 100Kohm
• Input sensitivity min 1Vrms, adjustable.
• Damping factor (100Hz): > 12
• Power supply: 100, 120, 230, 245VAC
• Power consumption: 230Wmax. / 66W standby
• Dimensions: 355W x 360D x 157H
*Modifications and typographical errors reserved
To Next Page
Loading...
