Velodyne CHT-R SERIES User Manual

www.velodyne.com
CHT-R Series User’s Manual - 9
USAGE
This section addresses day-to-day usage of your CHT-R subwoofer.
Remote Control
Figure 3 shows the remote control, enabling you to easily choose whatever listening mode you desire.
Figure 3. Remote Display
POWER - This button forces your CHT-R unit into standby mode. The woofer will not play and the LED will turn
o. The unit will remain in this mode until the POWER button is pressed again. To fully deactivate (i.e. power
down) the unit, turn o the power switch on the back panel.
MUTE - This button mutes the subwoofer. The light on the subwoofer will blink slowly if the unit is muted. To
unmute the subwoofer, press the MUTE button again.
PHASE - These buttons allow you to optimize the subwoofer performance for the location andyour listening
position. Select the switch position at which you hear the most bass. The light will blink according to the
following schedule:
0 degrees 1 blink
90 degrees 2 blinks
180 degrees 3 blinks
270 degrees 4 blinks

Velodyne CHT-R SERIES Specifications

General

Brand	Velodyne
Model	CHT-R SERIES
Category	Subwoofer
Language	English