Velux KLI 310 - Set-Up of Products for Group Control by One Master Wall Switch

VELUX
®
19
Set-up of products for roup control by one master wall switch (a)
Important: All wall switches must be the same model or the
universal KLI 310.
1
Prepare each of the selected products for reistration by
pressing each of their wall switch Gear buttons for 1 second.
The products will start running briefly back and forth.
2
Press the Pair button on the master wall switch for 1 second.
All products are now controlled simultaneously by the master wall
switch (a).
Repeat the procedure for products failing set-up and for adding
additional products.