Velux KLR 200 - Closing Windows if the Control Pad Has Been Mislaid

Operation
Operation without using the control pad
2
A
B
2
1
1
1
2
2
VELUX INTEGRA
®
KLR 200
VELUX 37
Centre-pivot windows
1
Determine window type
A
or
B
as shown on the previous
page. Disengage the chain according to window type.
2
Press the test button on the window operator briefly. Wait
until the chain stops moving then close the window manually.
Flat roof windows
1
Carefully remove the cover cap on the kerb.
2
Press the test button on the window operator behind the cover
cap briefly and refit the cover cap.
Top-hung windows
1
Remove the cover of the window operator.
2
Press the test button on the window operator briefly and refit
the cover.
Closing windows if the control pad has been mislaid
If your control pad has been mislaid, you can still close your window by carrying out the following actions.
Note: This feature is only available for the products shown.