HP25E / HP30E8. Maintenance
8-12 © VEMAG 2018
8.6.3 Vacuum pump (air lter)
An air lter is located in the intake line to the vacuum pump and this
needs to be cleaned weekly.
• Open the two locking clips (1) of the air lter and remove the lter
cover (2).
• Clean the lter cartridge (3) by blowing it out. If it is severely contami-
nated, the lter cartridge must be replaced.
1 Locking clips
2 Filter cover
3 Filter cartridge
Fig. 8-12
Air lter of intake line
1
2
3
• Insert the lter cartridge and x the lter cover in position.
8.6.4 Vacuum pump 40 m³
Operating instructions for vacuum pump
To Next Page
Loading...
