Index
ii © VEMAG 2004
ROBOT HP7C / HP10C / HP15C / HP17C
5. Operation 5-1
5.1 Working with the machine 5-1
5.2 Working with provisional drive 5-4
6. Cleaning 6-1
6.1 General information 6-1
6.2 Removing parts to be cleaned 6-1
6.2.1 Filling horn and filling horn holder 6-1
6.2.2 Linking horn (optional) 6-2
6.2.3 Linking gear (optional) 6-2
6.2.4 Double screws 6-3
6.2.5 Double screw housing 6-3
6.2.6 Hopper 6-6
6.2.7 Scraper 6-7
6.2.8 Vacuum system 6-8
6.3 Cleaning the machine 6-10
6.4 Cleaning schedule 6-11
6.5 Lubrication and assembly 6-12
6.5.1 Hopper 6-12
7. Maintenance 7-1
7.1 General information 7-1
7.2 Grease gun 7-2
7.3 First-time maintenance work 7-2
7.4 Maintenance schedule 7-3
7.5 Daily maintenance 7-4
7.5.1 Feed unit seals (lubrication) 7-4
7.6 Weekly maintenance 7-6
7.6.1 Feed unit drive (lubrication) 7-6
7.6.2 Vacuum pump (air filter and oil level) 7-7
7.7 Monthly maintenance 7-9
7.7.1 Hydraulic drive (oil level) 7-9
7.7.2 Double screw drive (oil level and seals) 7-10
7.8 Quarterly maintenance 7-11
7.8.1 Vacuum pump
(oil change, screens, gas ballast valve) 7-11
7.9 Six-monthly maintenance 7-18
7.9.1 Feed unit seals 7-18
7.10 Annual maintenance 7-19
7.10.1 Hydraulic drive (oil change and filter cartridge) 7-19
7.10.2 Feed unit drive and feed unit seals 7-20
7.10.3 Vacuum pump (air de-oiling element) 7-21
To Next Page
Loading...
