VEMAG ROBOT HP7C - Monthly and Quarterly Tasks

7. Maintenance
7-9
ROBOT HP7C / HP10C / HP15C / HP17C
© VEMAG 2004
7.7 Monthly maintenance
7.7.1 Hydraulic drive (oil level)
The tank is underneath the hydraulic drive. There is a sight glass for
checking oil level on the front of the tank. The oil should come at least to
the centre of the sight glass.
• Remove the housing cover over the stop bar for the trolley hoist on the
right-hand side of the machine.
• Check the oil level of the hydraulic drive using the sight glass provided
in the tank (1) and if necessary replenish oil through the filling opening
(2).
• Re-fit the housing cover.
Considerable or continuous lack of oil indicates a leak which must be
eliminated.
1 Sight glass
2 Filling opening
Fig. 7-7
Oil level of hydraulic drive
1
2