Vemer Chronos Key - Timing Setting

English
- 16 -
CHRONOS KEY Programmable Thermostat User Manual
Timing setting
This menu allows the setting of a timing on the current operating mode, expressed in
hours and days.
For further information about timings, see the chapter “Timings: what they
are” on page 29).
To set a timing:
1. From the normal operation display, press the key
for a long time until the
symbol
starts flashing on field (2)
2. Press the key
for a short time until the
symbol
flashes and press the key
to enter the parameters modification.
3. The value of the set timing currently flashes
(00= no timing). Enter the timing value
(from 1 to 99) with the keys
and
and press the key
to move to the
measurement unit change (hours and days).
4. The measurement unit starts flahing (hour
or day). Press the keys
and to
choose a timing in hours (h0ur) or days
(day).
For further information about timings, see the chapter “Timings: what they
are” on page 29).