English
- 30 -
CHRONOS KEY Programmable Thermostat User Manual
Timed off mode
When a timing is set in OFF mode, the status is maintained until the end of the timing.
After that, the operation will switch to the status before the deactivation (automatic or
manual).
When the timing is set, the display shows the symbol .
Attention: the timing is calculated in minutes, for this reason if a timing of 3
days is set at 12:15 PM on Tuesday, it will expire at 12:15 PM on Friday.
Attention: timings can end before programmed expiration, if one of these actions occur:
- hour/date modifi cation (modifi cation of the summer time change included)
- manual modifi cation of the operating mode
- switching of digital input (only for battery models)
- change of the operating logic from winter to summer (or viceversa)
To set a timing, see chapter “Timing setting” at page 16.
To Next Page
Loading...
