Venmar EuroDesign EDJDN1 Series User Manual

INSTALLATION MANUAL
INSTALLATION
11
6 ] Remove Electrical Power Cable Knockout from top (vertical wiring) or back (horizontal wiring)
of hood. For knockout removed from back of hood, install an appropriate strain relief,
1/2” diameter (not included). For knockout removed from top of hood, the strain relief will be
installed later.
ELECTRICAL
POWER CABLE
KNOCKOUT
5 ] Remove the parts bag, taped on the inner back of hood, near the left corner. Remove the EZ1
brackets from inside the hood by cutting off the tie wrap. Discard the tie wrap.
EZ1 BRACKETS
PARTS BAG LOCATION

Venmar EuroDesign EDJDN1 Series Specifications

General

Brand	Venmar
Model	EuroDesign EDJDN1 Series
Category	Ventilation Hood
Language	English