What to do if my Venmar vanEE 2000 HE is not working?
If your Venmar Fan isn't working, first, check if the unit is properly plugged into the power outlet. Second, verify that the unit is receiving power from the house circuit breaker or fuse.
Why is my Venmar vanEE 2000 HE Fan so noisy?
If your Venmar Fan is making excessive noise, you should clean the unit. If the problem persists after cleaning, it is recommended to contact your installer for further assistance.
How to reduce condensation on windows caused by my Venmar Fan?
To reduce condensation on windows when using your Venmar Fan, try the following: Operate the unit at maximum speed during activities that generate a lot of humidity, like cooking or family gatherings. Leave curtains half-open to improve air circulation. Store firewood in a closed room with a dehumidifier, a well-ventilated room, or outdoors. Ensure the temperature in your house stays above 18°C (64°F).
What to do if air from my Venmar vanEE 2000 HE is too cold?
If the air from your Venmar Fan is too cold, ensure that the outdoor hoods are not blocked. Operate the unit at low speed. It's also recommended to have the system's balancing and the unit's defrost system checked. Installing a duct heater is another possible solution.
How to fix dry air with Venmar vanEE 2000 HE Fan?
If the air is too dry when using your Venmar Fan, try operating the unit at low speed. You can also temporarily switch to the intermittent mode or use a humidifier to increase the humidity.
To Next Page
General
