Page 8
Clock Set
Use these buttons to
adjust the current time.
Use these buttons to
adjust the current day.
Setting the time & day are the first two steps after
sliding the Program Switch to SET.
Slide the Program Switch to
the SET position.
This thermostat is preprogrammed from the
factory to operate 1-stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
PM
6:00
:
Su
To slew the time more rapidly, push and hold the COOLER or
WARMER buttons.
OWNER'S MANUAL
T1035
Press NEXT
to advance
To Next Page
Loading...
