VentMed CPAP - BIPAP Mode Adjustments; Adjust EPAP Working Pressure (S, T, ST); Adjust Backup Rate (T, ST)

User Guide
VentMed
can set pressure 4-25 cmH2O for DS-7 BIPAP ST25 and 4-30 cmH2O for DS-8
BIPAP ST30
4. In work mode S, T, ST, press enter button to highlight EPAP (Expirate Positive
Airway Pressure). Press up/down button to adjust EPAP working pressure.
You can set pressure 4-20 cmH2O for DS-7 BIPAP ST25 and DS-8 BIPAP
ST30.
Attention: Inspirate pressure must be higher than expirate pressure.
To adjust Backup Rate
Designed to set device inspirate and expirate therapy times in 1 minute. You can
set 5-50bpm in mode T & ST.
10