Water tank is designed to easily come off in order to avoid damage to the parts or
the device. You can easily reassemble them as described below.
To insert the water tank seal:
1. Place the seal into bottom water tank.
2. Press down along all edges of the seal until it is firmly in place.
To reassemble the water tank:
1. Insert both up water tank into bottom water tank and sealed both sides.
General warnings and cautions
Make sure that you arrange the air tubing correctly so that it will not twist
around the head or neck.
Keep the power cord away from water source or hot surfaces.
Make sure the power cord and plug are in good condition and the device is not
damaged.
Do not open or modify the device. Repairs and servicing should only be
performed by your care provider.
Beware of electrocution. Do not immerse the device, power supply or power
cord in water. If liquids are spilled into or onto the device, unplug the device
and let the parts dry. Always unplug the device before cleaning and make sure
that all parts are dry before plugging it back in.
If you notice any unexplained changes in the performance of the device, if it is
making unusual sounds, if the device or the power supply are dropped or
To Next Page
Loading...
