21
Recording (Cont.)
Time-Shift Recording and Playback (in DTV mode only)
The time-shift function allows you to pause the live TV signal, then resume
playback at your convenience.
• First, insert your USB memory device into the USB port.
When Watching a Program in DTV Mode:
• Press the button on the remote control to initiate time-shift mode and
pause the program; the tool bar pictured below will appear on the screen
and will disappear after a few seconds.
• Press the or stop buttton again to bring back the tool bar.
• Press the button again to resume playback.
• Use the / buttons, then press OK to select a function such as Fast
Forward from the on-screen tool bar.
• To stop time-shift, press the STOP button on the remote control.
NOTE: The USB storage device will not retain recorded data after exiting the
time-shift function.
IMPORTANT!
Before you can record with this TV set (including time-shift recording), you must have
inserted a FAT32 formatted USB storage device into the USB (TV) port.
USB storage devices do not come with the TV.
To Next Page
Loading...
