EasyManua.ls Logo

Veridian 01-5021 - Care and Maintenance; Monitor Care and Maintenance; Cuff Care and Maintenance

Veridian 01-5021
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH 17
Proper care and maintenance of your blood pressure monitor will help ensure long life for the
product; improper use of the monitor may void the included warranty.
Monitor Care and Maintenance
Do not use any liquids on the monitor; use a soft, dry cloth to clean the monitor as needed
Storage outside of stated storage temperature may result in measurement error or device
malfunction; storage environment temperature is:
4
o
F – 131
o
F (-20
o
C – 55
o
C) Humidity ≤90% RH
Do not store in direct sunlight
Always keep the unit unplugged while not in use; remove the batteries if the unit will not
be used for an extended period of time
Do not attempt to disassemble your monitor; disassembling your monitor may void the
manufacturers warranty
Do not subject the monitor to strong shocks; take care not to drop the monitor
With proper care, the monitor will maintain performance for a minimum of 10,000
measurements or three years
No component of this device can be maintained by the user; the circuit diagrams,
component part lists, descriptions, calibration instruction or other information which will
assist the user's appropriately qualied technical personnel to repair those parts of
equipment which are designated repairable can be supplied.
It is recommended that monitor performance be reviewed every two years or after service
or repair; please contact your service provider or call customer care
Cuff Care and Maintenance
The cuff should not be submerged or washed in a washing machine, but may be spot
cleaned with a mild-detergent as needed; it is suggested that the cuff be cleaned once a
month if the deviced is used daily
Clean the cuff thoroughly after every 200 uses or more frequently as needed
To disinfect the cuff, wipe the inside (skin contact side) of the cuff lightly moistened with
70-90% ethyl rubbing alcohol and allow to air dry; it is suggested to disinfect the cuff
frequently when used in clinical settings or if the cuff is contaminated in any way
Never attempt to iron or dry the cuff; if the cuff becomes wet, allow the cuff to air dry
completely before use or storage
With proper care, the cuff will maintain performance for a minimum of 1000 measurements
Care and Maintenance

Related product manuals